Wiring the device modules
Function modules
8
70
EDK94ASH24 ZH/EN 4.1
X10 Pin Designation Explanation
16
59
1 B
TTL output signal from encoder or encoder simulation
2 A
3 A
4 +5 V V
CC
±6 %
5 GND −
6 Z
TTL output signal from encoder or encoder simulation
7 Z
8 Enable Digital output signal
SUBD09010
9 B TTL output signal from encoder or encoder simulation
Displays
Pos. Colour Condition Description
MS Green ON The module is supplied with voltage.
DE Red ON
The module is not accepted by the standard device (see notes
given in the documentation for the standard device).
To Next Page
Loading...
