Lenze M850 Series - Motor Connection; Connection Via ICN Connector

Motor connecon
Connecon via ICN connector
The electrical connecon to the servo motors as a standard is established via ICN connectors.
The connecon is made via two plug connectors, one for power and brake and one for
feedback and temperature monitoring. Alternavely, Lenze oers One Cable Technology
(OCT).
The connectors can be rotated by 270 ° and are provided with a bayonet catch. Since the catch
of the connector is also compable with convenonal box nuts, exisng mang connectors
with a screw plug can connue to be used without any problems.
In order to provide for a quick and error-free connecon of Lenze motors to
Lenze inverters, we recommend using prefabricated Lenze system cables.
One Cable Technology (OCT)
With the aid of the open motor feedback protocol HIPERFACE DSL® and the digital absolute
value encoder AM20-8V-D, the motor supports the future-oriented One Cable Technology
(OCT).
Advantages
•
All necessary wiring is done in only one connector.
•
The use of hybrid cables allows for combined servo and feedback cables.
•
This intelligently minimizes connecng cables, cable variants, and connecon costs.
•
The motor temperature is transmied digitally together with the encoder signal. An
addional connecon for a motor temperature sensor is not required.
Product extensions
Motor connecon
Connecon via ICN connector
127