Need help?Do you have a question about the Lenze m850-S120/S3960 and is the answer not in the manual?
General| Model | m850-S120/S3960 |
|---|---|
| Rated Power | 120 kW |
| Rated Torque | 3960 Nm |
| Communication Interface | EtherCAT |
| Relative Humidity | 95% non-condensing |
| Overload Capacity | 200% for 3 s |
Describes bevel gearboxes combined with servo motors as compact, powerful drive units.
Overview of gearbox designs, highlighting compact, space-saving, and standardized dimensions.
Details the m850 servo motor series, its modular design, and characteristics.
Disregarding safety information can lead to severe personal injury and property damage.
Discusses thermal power limits and factors affecting them, including mounting position and ambient conditions.
Explains the process of drive dimensioning considering drive function, mechanical, and thermal aspects.
Mounting surfaces must be plane, rigid, and free from vibrations; ensure unhindered ventilation.
Risk of injury from dangerous voltage; disconnect from mains before work.
Catalog data specifies rounded values for power, torque, speed under defined operating conditions.
Details degree of protection (IP54/IP65), temperature class, permissible voltage, and insulation.
Specifies conditions for storage, transport, operation, site altitude, and air humidity.
Calculation of permissible radial force considering additional load factor fw.
Maximum axial force is 50% of Frad,max if no radial force is present.
To Next Page
