Need help?Do you have a question about the Lenze MCS 06C60 and is the answer not in the manual?
Details the purpose, scope, and intended audience of this manual.
Information on locating additional Lenze product resources online.
Explains symbols, text conventions, and the layout of safety instructions.
Basic safety guidance to prevent personal injury and property damage.
Covers safe product use, qualified personnel, and electrical connection safety.
Safety precautions during product operation and process engineering.
Product's purpose, compliance with standards, and intended application.
Lists actions and conditions considered foreseeable misuse of the product.
Advises observing warning labels and the necessity of protective systems.
Covers motor protection measures, thermal detectors, and torque limitations.
Guidance on product identification and understanding nameplate details.
Explains the short designation for thermal sensors on nameplates.
Explains the composition and meaning of MCS servo motor product codes.
Details product code assignments for various encoders and signal levels.
Illustrates and labels key components and connection points on the motor.
Instructions for safe transport, handling, load securing, and avoiding damage.
Specifies optimal storage environment, packaging, and duration.
Covers pre-installation notes, preparation steps, and mounting procedures.
Directs users to configuration documents for detailed dimensions.
Guidance on mounting transmission elements, belts, and securing fasteners.
Covers electrical safety, inverter operation, and wiring references.
Notes on safe terminal box wiring, air gaps, and cable glands.
Overview of connection positions and types for power, brake, and resolver.
Details for SinCos/EnDat encoders and temperature monitoring connections.
Identifies ICN connectors and assigns them to motor models for power/brake.
Pin details for ICN-M23 and M40 connectors for power and brake connections.
Pin details for resolver and Hiperface encoders using ICN-M23.
Pin details for EnDat encoders (ICN-M23) and blowers (ICN-M17).
Pin details for One Cable Technology (OCT) hybrid connectors with encoders.
Pin details for One Cable Technology (OCT) hybrid connectors with encoders.
Notices for safe connector assembly and instructions for additional PE connection.
Checklist before initial operation and steps for functional testing.
Safety measures, cleaning guidelines, and specific maintenance notes.
Recommends service for repairs and provides contact guidance for faults.
Table of errors, causes, and remedies for common motor malfunctions.
Lists relevant standards, conformity approvals, and protection ratings.
Specifies requirements for noise emission and noise immunity.
Details environmental requirements for climate, altitude, and vibration.
Overview of torque, speed, power, current, voltage, and constants.
Specific technical data for MCS 09 series 400V self-ventilated motors.
Specific technical data for MCS 12 series 400V self-ventilated motors.
Specific technical data for MCS 14 series 400V self-ventilated motors.
Specific technical data for MCS 14 series 400V self-ventilated motors.
Specific technical data for MCS 19 series 400V self-ventilated motors.
Specific technical data for MCS 12 series 400V forced ventilated motors.
Specific technical data for MCS 14 series 400V forced ventilated motors.
Specific technical data for MCS 14/19 series 400V forced ventilated motors.
Specific technical data for MCS 19 series 400V forced ventilated motors.
Specific technical data for MCS 06 series 230V self-ventilated motors.
Specific technical data for MCS 09 series 230V self-ventilated motors.
Specific technical data for MCS 12 series 230V self-ventilated motors.
Covers environmental policy, hazardous substances, and disposal methods.
Information on energy efficiency and sustainability efforts.
To Next Page
General