Need help?Do you have a question about the Lenze MDXK Series and is the answer not in the manual?
General| Series | MDXK |
|---|---|
| Category | Servo Drives |
| Protection Class | IP20 |
| Storage Temperature | -25°C to +70°C |
| Communication | CANopen, EtherCAT, PROFINET |
| Safety | STO (Safe Torque Off), SS1 (Safe Stop 1), SOS (Safe Operating Stop), SLS (Safely Limited Speed), SDI (Safe Direction) |
| Communication Interfaces | CANopen, EtherCAT, PROFINET |
| Operating Temperature | 0°C to +45°C |
| Cooling Method | Natural convection or forced air cooling (depending on model) |
| Relative Humidity | 5% to 95%, non-condensing |
Provides essential safety guidelines for working with Lenze motors.
Provides safety guidelines specific to Lenze controllers and accessories.
Identifies potential dangers and hazards associated with the product.
Provides key performance specifications like speed, torque, and weight.
Describes the function and specifications of permanent magnet holding brakes.
Explains the operation and characteristics of spring-operated brakes.
Guides on configuring motor and controller parameters for optimal performance.
Details how to interconnect function blocks for the servo inverter.
Addresses common problems like motor overheating, starting failures, and speed issues.
Details necessary maintenance tasks and safety precautions.
Explains how to adjust resolver position for synchronous servo motors.
To Next Page
