When the watch shows that the battery is
low, connect the watch to a USB port with
5V-500mA.
While the watch charges, there is a battery
progress bar on the screen and you can
press the function button to check the
battery level.
- 2 -
When the watch shows that the battery is low,
connect the watch to a USB port with
5V-500mA.
While the watch charges, there is a battery
progress bar on the screen and you can press
the function button to check the battery level.
Remove the watch from the power supply once fully charged.
Disassembling / Assembling Your Watch
Disassembly
1. To remove the wristbands, turn over the watch and find the
quick-release lever.
2. While pressing the quick-release lever inward, gently pull the
wristband away from the watch to release it.
To Next Page
Loading...
