Do you have a question about the Letsfit D32 and is the answer not in the manual?
Bluetooth Standard | V5.0 |
---|---|
Operating Range | 33 feet/10 meters (No obstacles between) |
Supporting Protocols | A2DP/HFP/HSP/AVRCP |
Waterproof Rate | IPX5 |
Charging Time | 1.5 hours (earbuds); 1 hour (charging case) |
Battery Type | Li-polymer |
Battery Capacity | 60mAh (earbuds); 500mAh (charging case) |
Talk/Playing Time | about 3.5 hours (Varies according to volume level and audio content) |
Charging Voltage | DC 5V |
Overview of the charging case components, including the charging port and LED indicator.
Details on earbud parts like LED indicator, MFB button, microphone, air hole, charging contacts, and eartips.
Instructions on removing insulating films and aligning charging contacts for earbuds.
Steps for connecting the USB cable to charge the charging case via a wall charger or computer.
Details on automatic and manual power on/off procedures for the earbuds.
Instructions for pairing both earbuds with a Bluetooth device, including connection steps and passkey.
Guide on how to pair and use a single earbud for mono audio.
How to adjust the volume by pressing the MFB button twice on the earbuds.
Instructions to skip to the last/next song by pressing and holding the MFB button.
How to pause and resume music playback using the MFB button.
Procedures for answering, hanging up, and rejecting calls using the MFB button or phone.
Steps to resolve issues when earbuds fail to pair with a Bluetooth device.
How to disconnect from one phone and pair with a different Bluetooth device.
Explains common causes for intermittent or unclear sound, like distance or obstacles.
Addresses problems where the charging case does not charge the earbuds, including dormant state.
Critical safety guidelines for using the earbuds, including warnings for children, disassembly, and environmental factors.
Information regarding the 1-year warranty offered for the wireless earbuds and how to contact for support.