EasyManua.ls Logo

Leupold FX-3 - Final Sighting-In Steps

Leupold FX-3
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
adjustable objective or side focus model scope, perform any correc-
tion for parallax before continuing, as explained in “Understanding
Parallax” on pages 29-32.)
1. Fire a shot or two.
2. If you are several inches off center, make an appropriate
amount of adjustment to move the reticle to the center of
the target.
3. Carefully fire a three-shot group.
4. Use the center of that group as a reference point for the final
adjustments to windage and elevation.
On the sample target, the center of the group is two inches low and
three inches right. Assuming
you’re sighting-in at 100 yards,
you should make a 2-MOA
adjustment up, and a 3-MOA
adjustment left. Your next
three-shot group should be
very close to the center of the
target. To learn about making
final adjustments, proceed to
the upcoming section on wind-
age and elevation adjustments.

Related product manuals