35
Changing the Battery
All Leupold Illuminated Reticle scopes use a 3-volt lithium photo
battery. See page 36.
To change the battery:
1. Remove the battery cover by grasping its edge (located around the
top of the illumination dial) and twisting the cover counterclockwise
while holding the sides of the illumination dial to keep the entire
dial from turning.
2. Remove the old battery from its position in the center of the dial.
The battery for the Leupold Illuminated Reticle is located inside
the control dial and can be changed without tools.
Battery
Changing the Battery
To Next Page
Loading...
