24
CENTERING WINDAGE AND ELEVATION
ADJUSTMENTS TO ACHIEVE OPTIMUM
ADJUSTMENT TRAVEL
Making windage and elevation adjustments moves the entire erector
system horizontally and vertically inside the scope. If the erector
system is off to one side – as a result of having been mounted on a
non-adjustable mount – the adjustments won’t provide equal travel
in all directions. To regain full balanced travel, you must recenter the
adjustment as follows:
1. Turn the windage adjustment to the point that it stops moving.
2. Counting the clicks or hash marks, turn it all the way in the
other direction.
3. Turn the dial back half the amount of clicks or hash marks
counted.
4. Repeat this process for the elevation adjustment.
To Next Page
Loading...
