21
FUNCTION 4: ALTITUDE INPUT (GX-2i ONLY)
Altitude is one of the factors used to determine
TGR ranges; inputting the local elevation/altitude
will increase the accuracy of your TGR measurement.
The default altitude setting is 1000 feet, and will be
shown in the lower portion of the display. After
activating TGR, the last saved current temperature
will be displayed, followed by the last saved current
altitude. Press POWER to set the altitude to match current conditions; each
depression of POWER will increase the altitude setting by 500 feet. The total
range of available altitude settings is 0 to 9999 feet. Press MODE to save your
input and move to the next function.
How do I manually Input tHe cuRRent elevatIon? (GX-2i only)
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second to enter the Quick Set Menu.
2
3
4
5
6
7
8
9
P
To Next Page
Loading...
Need help?
General
