Leupold GX 2i User Manual

32
8-iron shot in 5-yard/meter increments beginning with the last saved
distance, until 200 yards has been reached. Once 200 yards has been
reached, it will reset to 60 yards, and start over again. When the
appropriate distance is displayed, press MODE.
3) The 6-iron symbol will now be highlighted and the last saved distance
will be shown in the upper numeric display. If you wish to input a
distance other than the one shown, proceed to step 4. To save the
shown distance for your 6-iron, press MODE and skip to step 5 below.
4) Press POWER to set the distance obtained with your 6-iron. Each
depression of POWER will increase the distance associated with your
6-iron shot in 5-yard/meter increments beginning with the last saved
distance, until 220 yards has been reached. Once 220 yards has been
reached, it will reset to 80 yards, and start over again. When the
appropriate distance is displayed, press MODE.
5) The 4-iron symbol will now be highlighted and the last saved distance
will be shown in the upper numeric display. If you wish to input a
distance other than the one shown, proceed to step 6. To save the
shown distance for your 4-iron, let the unit sit idle for at least 20 seconds

Leupold GX 2i Specifications

General

Brand	Leupold
Model	GX 2i
Category	Measuring Instruments
Language	English