13
automatically be measured in Fahrenheit. If Meters is selected,
the temperature will be measured in Celsius.
MANUALLY INPUT THE DAY OF PLAY TEMPERATURE:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds to enter the
Quick Set Menu.
3) Verify that TGR is turned on; if TGR is not activated, you will
not be able to enter the current temperature, see “To Activate
TGR”.
4) Press and release MODE until the temperature is displayed.
5) While the temperature is flashing, press and release POWER
to change the current temperature setting to match the
current conditions. Each depression of POWER will increase
the temperature setting by 5 degrees until 120 degrees F
(50 degrees C) has been reached, at which time the
setting will return to 30 degrees F (0 degrees C) and begin
increasing again.
6) To save the changes and return to ranging mode, let the unit
sit idle for at least 30 seconds until an automatic power-down
occurs, or simply press and hold MODE for at least 2 seconds.
To Next Page
Loading...
Need help?
General
