14
To continue through the Quick Set Menu and manipulate
another feature, press and release MODE
until the appropriate icon is displayed.
DAY OF PLAY ALTITUDE INPUT (dP)
(GX-5c ONLY):
Altitude is one of the factors used to determine
TGR ranges; inputting the local elevation/
altitude will increase the accuracy of your TGR measurement.
The default altitude setting is 1000 feet, and will be shown in the
lower portion of the display.
NOTE: Altitude is always measured in feet.
MANUALLY INPUT THE DAY OF PLAY ALTITUDE:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds to enter the
Quick Set Menu.
3) Verify that TGR is turned on; if TGR is not activated, you will
not be able to enter the current altitude, see “To Activate TGR”.
4) Press and release MODE until “Alt” is displayed.
5) While the “Alt” is flashing, press and release POWER
to change the current altitude setting to match current
conditions; each depression of POWER will increase the
To Next Page
Loading...
Need help?
General
