23
function, press and release MODE until the
appropriate icon is displayed.
4) Press POWER to begin incrementing through
the altitude settings. The default setting is
1000 feet. Pressing POWER will increment
through a range of 0 feet to 9,999 feet in
500 foot increments. When the appropriate
altitude is displayed, you have completed the input process for
setting up the temperature and altitude at which the striking
distances were measured. To save the changes and return to
ranging mode, let the unit sit idle for at least 30 seconds until
an automatic power-down occurs, or simply press and hold
MODE for at least 2 seconds. To continue through the Quick
Set Menu and manipulate another function, press and release
MODE until the appropriate icon is displayed.
SELECTABLE RETICLES
This mode is used to choose from any one of 3 preloaded aiming
reticles for your GX digital laser rangefinder.
HOW TO CHOOSE A PARTICULAR AIMING RETICLE/
CROSSHAIR:
1) Press POWER to activate the rangefinder.
To Next Page
Loading...
Need help?
General
