11
When you press and hold the MODE button for 1 second and then release it, the
Quick Set Menu
is activated. To set or activate a mode, you must advance to that
function by pressing the MODE button until that function is displayed. To activate
or manipulate a function, press the POWER button as necessary. If this is the last
function to be set, allowing the rangefinder to sit idle for 30 seconds will cause an
automatic power-off, saving all selections. If additional set up is required, simply
press MODE to continue through the Quick Set Menu.
Pressing and holding MODE for at least 2 seconds at any time will exit the Quick
Set Menu, save all previous changes, and prepare the rangefinder for immediate
use. To reset your GX-3i
3
or GX-4i
3
to factory settings, press POWER to activate
the unit. With the rangefinder activated, press and hold MODE, then immediately
press and hold POWER while continuing to hold MODE. After the 10-second timer
shown in the display reaches zero, the rangefinder will return to factory settings.
To Next Page
Loading...
Need help?
General
