19
5) While the “Alt” is flashing, press and release POWER to change the current
altitude setting to match current conditions; each depression of POWER will
increase the altitude setting by 500 feet until 9999 has been reached, at
which time the setting will return to 0 and begin increasing again.
6) To save the changes and return to ranging mode, let the unit sit idle for at
least 30 seconds until an automatic power-down occurs, or simply press and
hold MODE for at least 2 seconds. To continue through the Quick Set Menu
and manipulate another feature, press and release MODE until the
appropriate icon is displayed.
To Next Page
Loading...
