27
8) The 4-iron indicator will be shown in the upper display, and
either the last saved distance or 6-iron distance plus 20 yards will
be shown in the lower display. If you wish to input a distance
other than the one shown, proceed to step 9. To
save the shown distance for your 4-iron, let the
unit sit idle for at least 30 seconds until an
automatic power-down occurs, or simply press
and hold MODE for at least 2 seconds. To
continue through the Quick Set Menu and
manipulate another feature, press and release
MODE until the appropriate icon is displayed.
9) Press POWER to set the distance obtained with your 4-iron shot
in 5-yard/meter increments, until 240 yards (220 meters) has been
reached. Once 240 yards (220 meters) has been reached, it will reset
to the 6-iron distance plus 5 yards/meters and start over again. When
the appropriate distance is displayed, let the unit sit idle for at least
30 seconds until an automatic power down occurs, or simply press and
hold MODE for at least 2 seconds. To continue through the Quick Set
Menu and manipulate another mode, press and release MODE until the
appropriate icon is displayed.
To Next Page
Loading...
