24
Pressing POWER will increment through a range of 100 yards to 240 yards in
5-yard/meter increments. When your selection is shown in the lower numeric
display, press MODE to save your selection and move on to the temperature
input (the temperature at which these distances were measured).
NOTE:
You cannot input a distance value less than or equal to the previous
club. For example, if you choose 175 yards for your 6-iron, the lowest available
distance for your 4-iron will be 180 yards.
Once the specific distances obtained with each of the
clubs above has been input, you will be asked to input the
temperature and elevation at which these distances were
obtained. Following the input of your measured
4-iron striking distance, the next depression of MODE will
begin the process of entering the temperature at which
this distance was obtained.
The last saved temperature will be flashing in the
bottom portion of the display. Press POWER to begin
incrementing through the temperature settings. The
default setting is 75 degrees F. Pressing POWER will
To Next Page
Loading...
Need help?
General
