25
increment through a range of 30 degrees to 120 degrees F in 5 degree incre-
ments. When the appropriate temperature is displayed, press MODE to save
your selection and move on to the altitude input.
The last saved altitude will be flashing in the bottom
portion of the display. Press POWER to begin
incrementing through the altitude settings. The default
setting is 1000 feet. Pressing POWER will increment
through a range of 0 feet to 9999 feet in 500 foot
increments. When the appropriate altitude is displayed,
press MODE to save your selection and move to the last
mode (aiming reticle selection).
To Next Page
Loading...
