26
3) Press and release MODE until “bEEP” is displayed.
4) While the word “bEEP” is displayed press and release POWER
as necessary until the word “OFF” is displayed. Press MODE
to save the changes.
NOTE: Prism Lock only works in Scan Mode while pressing and
holding the POWER button.
CLEANING/MAINTENANCE
Blow away dust or debris on lenses, or use a soft lens brush
(such as the one found on the Leupold LensPen). To remove
fingerprints, water spots or tougher dirt, use a soft cotton cloth
or the cleaning end of the Leupold LensPen. A lens tissue with
lens cleaning fluid may be used for more stubborn dirt. Always
apply cleaning fluid to the cleaning cloth, never directly to the
lenses. To insert a new battery, remove the battery cover (shown
in diagram on page 8) and remove the exhausted battery. Insert
a new CR-2 battery, negative terminal first, into the battery
compartment. Close battery cover.
All GX rangefinders are waterproof.
All GX rangefinders include a lanyard and are equipped with a
lanyard attachment for added security on the course.
To Next Page
Loading...
Need help?
General
