17
3) Verify that TGR is turned on; if TGR is not
activated, you will not be able to enter club
selections. See “To Activate TGR”.
4) Press and release MODE until “club”
is displayed.
5) While “club” is shown in the lower portion
of the display, press and release POWER as
necessary until “On” is shown in the upper
portion of the display.
6) To save the changes and return to ranging mode, let the unit
sit idle for at least 30 seconds until an automatic power-down
occurs, or simply press and hold MODE for at least 2 seconds.
To continue through the Quick Set Menu and manipulate
another feature, press and release MODE until the appropriate
mode is displayed.
Critical to accurate club recommendations is the known striking
distance of the user with specific clubs. By inputting the actual
distance obtained with a few clubs, a specialized algorithm
accurately determines the distance obtained with others.
The actual distance obtained from an 8-iron, 6-iron, and 4-iron
shot should be input as accurately as possible.
If no club distance is input, the Club Selector will automatically
default to the preset distances (130 yards for an 8-iron, 150 yards
To Next Page
Loading...
