20
2) Press and hold MODE for at least 2 seconds
and then release to enter the Quick Set
Menu.
3) Press and release MODE until 8 Iron is
displayed.
4) The 8-iron indicator will be shown in the
upper display, and the last saved distance will
be shown in the lower display. If you wish to input a distance
other than the one shown, proceed to step 5. To save the
shown distance for your 8-iron, press MODE and skip to step 6
below.
5) Press POWER to set the distance obtained with your 8-iron.
Each depression of POWER will increase the distance
associated with your 8-iron shot in 5-yard/meter increments
beginning with the last saved distance, until 200 yards (185
meters) is reached. Once 200 yards (185 meters) is reached, it
will reset to 60 yards (55 meters), and start
over again. When the appropriate distance
is displayed, press MODE.
6) The 6-iron indicator will be shown in the
upper display, and either the last saved
distance or 8-iron distance plus 20 yards will
be shown in the lower display. If you wish to