26
3) The 6-iron symbol will now be highlighted and the last saved distance
will be shown in the upper numeric display. If you wish to input a
distance other than the one shown, proceed to step 4. To save the
shown distance for your 6-iron, press MODE and skip to step 5 below.
4) Press POWER to set the distance associated with your 6-iron. Each
depression of POWER will increase the distance associated with your
6-iron shot in 5-yard/meter increments beginning with the last saved
distance, until 220 yards has been reached. Once 220 yards has been
reached, it will reset to 80 yards, and start over again. When the
appropriate distance is displayed, press MODE.
5) The 4-iron symbol will now be highlighted and the last saved distance
will be shown in the upper numeric display. If you wish to input a
distance other than the one shown, proceed to step 6. To save the
shown distance for your 4-iron, let the unit sit idle for at least 20 seconds
until an automatic power-down occurs, or simply press and hold MODE
for at least 1 second. To continue through the Quick Set Menu and
manipulate another feature, press and release MODE until the
appropriate icon is flashing.
To Next Page
Loading...
Need help?
General
