25
used by the GX-II will make logical assumptions about the remaining club(s) if
specific distances are not known for one or more of the remaining clubs.
*Reminder: You cannot input a distance value less than or equal to the previous
club. For example, if you choose 155 yards for your 8-iron, the lowest available
distance for your 6-iron will be 160 yards.
The procedure for inputting specific striking distance begins immediately after
activating the Club Selector feature. Follow steps 1-5 above, under the heading
“How Do I Activate the Club Selector?” Once the Club Selector has been
activated, press MODE and follow the steps below:
1) The 8-iron symbol will be highlighted and the last saved distance will
be shown in the upper numeric display. If you wish to input a distance
other than the one shown, proceed to step 2. To save the shown
distance for your 8-iron, press MODE and skip to step 3 below.
2) Press POWER to set the distance associated with your 8-iron. Each
depression of POWER will increase the distance associated with your
8-iron shot in 5-yard/meter increments beginning with the last saved
distance, until 200 yards has been reached. Once 200 yards has been
reached, it will reset to 60 yards, and start over again. When the
appropriate distance is displayed, press MODE.
To Next Page
Loading...
Need help?
General
