29
3) The last saved altitude will be flashing in the bottom portion of the
display and the Club Selector icon will be highlighted in the upper
numeric display. If you wish to input an altitude other than the one
shown, proceed to step 4. To save the shown altitude and return to
ranging mode, let the unit sit idle for at least 20 seconds until an
automatic power-down occurs, or simply press and hold Mode for at
least 1 second. To continue through the Quick Set Menu and manipulate
another feature, press and release MODE until the appropriate icon
is flashing.
4) Press POWER to begin incrementing through the altitude settings. The
default setting is 1,000 feet. Pressing POWER will increment through
a range of 0 feet to 9,999 feet in 500 foot increments. When the
appropriate altitude is displayed, you have completed the input process
for setting up the temperature and altitude at which the striking
distances were measured. To save the changes and return to ranging
mode, let the unit sit idle for at least 20 seconds until an automatic
power-down occurs, or simply press and hold Mode for at least 1 second.
To continue through the Quick Set Menu and manipulate another
feature, press and release MODE until the appropriate icon is flashing.
To Next Page
Loading...
Need help?
General
