31
How do I choose a particular aiming reticle/crosshair?
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second to enter the Quick Set
Menu.
3) Press and release MODE repeatedly until the reticle is flashing.
4) While the reticle is flashing, press and release POWER.
5) Continue pressing and releasing POWER until the desired reticle is
flashing.
6) To save the changes and return to ranging mode, let the unit sit idle
for at least 20 seconds until an automatic power-down occurs, or sim-
ply press and release MODE. As this is the last option in the Quick Start
Menu, simply pressing and releasing MODE will save your reticle
selection and return the GX rangefinder to the ready/ranging mode. To
continue through the Quick Set Menu and manipulate another feature,
press and release MODE until the appropriate icon is flashing.
To Next Page
Loading...
Need help?
General
