32
FUNCTION 7: YARDS OUTPUT
This mode displays both Line-of-Sight (LOS) and TGR
ranges in yards, and will disable readings in meters.
TGR is displayed in large numbers just above the
reticle; LOS is displayed in small numbers below and
to the right of the reticle (above the angle readout).
Press POWER to toggle yards on or off. Press MODE
to save your selection and move to the next function.
NOTE:
TGR is available on GX-II models only. GX-I models will only display LOS
in large numbers above the reticle.
How do I actIvate tHe yaRdS mode?
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second to enter the Quick Set Menu.
3) Press and release MODE repeatedly until the yards icon is flashing.
4) While the yards icon is flashing, press and release POWER as necessary
until the yards icon is displayed steadily and the word “ON” is
displayed in the lower portion of the display.
2
3
4
5
6
7
8
9
P
To Next Page
Loading...
Need help?
General
