33
5) To save the changes and return to ranging mode, let the unit sit idle
for at least 20 seconds until an automatic power-down occurs, or simply
press and hold MODE for at least 1 second.
NOTE:
If yards is selected, the temperature will automatically be measured by
Fahrenheit. If meters is selected, the temperature will be measured in Celsius.
FUNCTION 8: METER OUTPUT
This mode displays both line-of-sight (LOS) and TGR ranges in meters, and will
disable readings in yards. TGR is displayed in large
numbers just above the reticle; LOS is displayed in
small numbers below and to the right of the reticle
(above the angle readout). Press POWER to toggle
meters on or off. Press MODE to save your selection
and move to the next function.
NOTE:
TGR is available on GX-II models only. GX-I
models will only display LOS in large numbers above
the reticle.
2
3
4
5
6
7
8
9
P
To Next Page
Loading...
Need help?
General
