34
How do I actIvate tHe meteRS mode?
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second to enter the Quick Set Menu.
3) Press and release MODE repeatedly until the meters icon is flashing.
4) While the meters icon is flashing, press and release POWER as necessary
until the meters icon is displayed steadily and the word “ON” is
displayed in the lower right portion of the display.
5) To save the changes and return to ranging mode, let the unit sit idle
for at least 20 seconds until an automatic power-down occurs, or simply
press and hold MODE for at least 1 second.
NOTE:
If yards is selected, the temperature will automatically be measured by
Fahrenheit. If meters is selected, the temperature will be measured in Celsius.
To Next Page
Loading...
