Need help?Do you have a question about the Leuze electronic DDLS 200/120 Series and is the answer not in the manual?
General| Brand | Leuze electronic |
|---|---|
| Model | DDLS 200/120 Series |
| Category | Accessories |
| Language | English |
Explains how the DDLS 200 uses two frequencies to prevent interference.
Lists electrical, optical, and mechanical specifications of the DDLS 200.
Guides on how to mount and align the DDLS 200 devices for optimal data transmission.
Explains how to connect multiple DDLS 200 systems in series.
Details the fiber-optic connection for INTERBUS 2MBit/s.
Details the electrical connection for DH+ / RIO.
Details electrical connection for DeviceNet/CANopen using terminals.
Explains power connection for bus transceiver and device separately.
Explains power connection via bus cable and separate power.
Details power connection for bus transceiver and device via bus cable.
Details electrical connection for DeviceNet/CANopen using M12 connectors.
Explains baud rate conversion in DeviceNet/CANopen.
Explains termination requirements for DeviceNet and CANopen.
Details Ethernet connection using screwed cable glands and terminals.
Details Ethernet connection using M12 connectors.
Explains Ethernet device configuration, including autonegotiation.
Instructions for performing fine alignment of the DDLS 200 devices.
Lists common faults, their possible causes, and remedies.
To Next Page
