LEVELFIX LXD60i - Page 28

EN
28
FUNCTIONS
Addition / Subtraction
Angle measurement
Then measure
the second data.
The result is shown in the
main line and the measured
distance above.
Measure the
rst data.
Inclination measurement is
used to measure a slope or
incline (e.g. stairs, railings,
when tting furniture,
laying pipes, etc.).
The result is shown at
the top of the 0
o
-360
0
(4 x 90
0
).
Press button once to add
or twice to subtract next
measurement from the
previous data.