EasyManua.ls Logo

LevelOne 59910203 - User Manual

LevelOne 59910203
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GEP-1070
L2 Managed Gigabit PoE Switch, 802.3at PoE+,
8 PoE Outputs, 2 x SFP
Quick Installation Guide
English
Italiano
Deutsch
Русский
Français
Português
Español
简体中文

Questions and Answers

  • L
    Larry SullivanNov 6, 2025
    What to do if I cannot connect to my LevelOne Switch using a web browser?
    • E
      Emily YuNov 6, 2025
      If you're unable to connect to the LevelOne Switch using a web browser, ensure the switch is powered on. Also, verify the network cabling between your management station and the switch. Make sure you have a valid network connection to the switch and that the port you're using hasn't been disabled. Be sure the management station has an IP address in the same subnet as the switch’s IP interface to which it is connected. If you are trying to connect to the switch via the IP address for a tagged VLAN group, your management station, and the ports connecting intermediate switches in the network, must be configured with the appropriate tag. Finally, confirm that you've configured the VLAN interface through which the management station is connected with a valid IP address, subnet mask, and default...

LevelOne 59910203 Specifications

General IconGeneral
Speed10/100/1000 Mbps
Switching Capacity16 Gbps
MAC Address Table8K
Jumbo Frame9KB
Power ConsumptionMaximum 5.2W

Related product manuals