Need help?Do you have a question about the LevelOne GEP-2450 and is the answer not in the manual?
General| MAC Address Table | 8K |
|---|---|
| Primary Function | Managed Switch |
| Ports | 24 x 10/100/1000BASE-T |
| Jumbo Frame Support | 9K |
| Power Supply | Internal |
Provides a general overview of the 24-port Gigabit Web Smart PoE Switch features.
Details the switch's comprehensive hardware and management features.
Illustrates and describes the front panel interfaces, including ports, LEDs, and buttons.
Details the user interfaces located on the rear panel of the switch.
Lists and describes the available optional SFP fiber transceivers for connection expansion.
Guides users through initial hardware installation, cable connections, and powering up the switch.
Specifies recommended cable grades and maximum lengths for TP and SFP fiber connections.
Explains IP address structure, classes, subnet masks, and default gateway settings.
Explains Ethernet architecture, LLC, MAC addressing, and frame formats for network communication.
Details MAC addressing, Ethernet frame format, and MAC operation.
Explains how switches work, collision domains, and traffic aggregation.
Introduces VLAN concepts, types, and their benefits in network segmentation.
Describes the initial login, web interface layout, and system information display.
Lists and describes the main configuration functions available via the web interface.
Explains how to monitor port statistics, IGMP status, PoE status, and perform ping tests.
Details maintenance tasks like warm restart, factory default reset, software upgrades, and configuration file management.
Lists common causes and troubleshooting steps for a port showing no link status.
Provides answers to common user questions regarding connectivity and configuration.
Summarizes the key features and standards compliance of the Web Smart Switch.
Provides detailed specifications for network interfaces, transmission modes, speeds, and cable lengths.
To Next Page