Need help?Do you have a question about the LevelOne GEP-2651 and is the answer not in the manual?
General| Switching Capacity | 52 Gbps |
|---|---|
| MAC Address Table | 8K |
| Primary Port Speed | 10/100/1000 Mbps |
| Quality of Service | Yes |
| Type | Managed |
| Ports | 24 RJ45, 2 SFP |
| Layer | Layer 2 |
| Power Supply | 100-240V AC, 50/60Hz |
| Primary Ports | 24 RJ45 |
| Uplink Ports | 2 SFP |
| Management | SNMP |
| Mounting | Rackmount |
| VLAN Support | Yes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C ~ 70°C |
Details on the initial setup and login process for the web interface.
Provides system contact, name, and location details.
Configuration of IP addresses, interfaces, and routes.
Configuration of global and VLAN modes for DHCP server.
User management, privilege levels, and authentication methods.
Configuration of PoE port settings and power supply.
QoS ingress classification settings for ports.
Displays basic system information like model, uptime, and firmware version.
Provides overview of general traffic statistics for all switch ports.
Displays database counters and DHCP message statistics.
Issuing ICMP PING packets to troubleshoot IPv6 connectivity.
Running VeriPHY for cable diagnostics.
Procedure for restarting the switch for maintenance.
Process to reset the switch configuration to factory default values.
Procedure for upgrading the switch firmware.
Saving, uploading, downloading, activating, and deleting configuration files.
To Next Page
