Publication date: June, 2015
Revision A1
Chapter 5. Maintenance
This chapter describes the entire switch Maintenance configuration tasks to enhance
the performance of local network including Restart Device, Firmware upgrade,
Save/Restore, Import/Export.
5-1 Restart Device
This section describes how to restart switch for any maintenance needs. Any configuration files
or scripts that you saved in the switch should still be available afterwards.
Web Interface
To configure a Restart Device Configuration in the web interface:
1. Chick Restart Device.
2. Click Yes.
Figure 5-1: Restart Device
Parameter description:
Restart Device :
You can restart the switch on this page. After restart, the switch will boot normally.
Buttons:
Yes – Click to “Yes” then the device will restart.
No- Click to undo any restart action.
To Next Page
Loading...
