LevelOne GEP-2651 - 5-3.1 Download; Software

Publication date: June, 2015
Revision A1
295
5-3 Software
This section describes how to upgrade Firmware. The Switch can be enhanced with more
value-added functions by installing firmware upgrades.
5-3.1 Download
This page facilitates an update of the firmware controlling the switch..
Web Interface
To configure a Firmware Upgrade Configuration in the web interface:
1. Chick Browser to select Maintenance/Software in you device.
2. Click Download.
Figure 5-3.1 The firmware Download
Parameter description:
 Browse :
Click the “Browse...” button to search the Firmware URL and filename.
NOTE: This page facilitates an update of the firmware controlling the
switch. Uploading software will update all managed switches to the
location of a software image and click. After the software image is
uploaded, a page announces that the firmware update is initiated.
After about a minute, the firmware is updated and all managed
switches restart. the switch restarts.
W ARNING : While the firmware is being updated, Web access appears
to be defunct. The front LED flashes Green/Off with a frequency of 10
Hz while the firmware update is in progress. Do not restart or power
off the device at this time or the switch may fail to function
afterwards.
Brows
e...