FCS-6020 User Manual
3/56
Overview
The LevelOne FCS-6020 is a quality yet cost-effective surveillance solution for
the home and office. It is designed for easy and flexible installation, supporting
two power options (12 VDC/PoE) and the motorized Pan and Tilt provides a
viewing angle of ±355° pan and ±135° tilt. Equipped with a 2-Megapixel sensor
and built-in IR cut filter/IR illuminator LEDs, the camera provides high resolution
quality and sharp sensitivity – ideal for security applications both day and night.
The FCS-6020 is equipped with many advanced features such as Level1DNS™
Service, DI/DO for external alarm and sensor, a SD/SDHC card slot and USB
interface for local storage, built-in microphone and external speaker for 2-way
audio communications. Moreover, users can also set up 16 motion-detection
regions with the camera, each with adjustable size and sensitivity. When motion
is detected at the specified regions, the system can send an E-mail alert or send
captured images via FTP upload to a designated storage server. The FCS-6020
is indisputably the top choice for reliable and high performance surveillance.
Law in your country may prohibit the use of surveillance devices. The Network
Camera is not only a high-performance web-ready camera but also can be part
of a flexible surveillance system. It is the user’s responsibility to ensure that the
operation of such devices is legal before installing this unit for its intended use.
Minimum System Requirement
· CPU: Intel® Celeron® Dual-Core @2.70GHz or above
· Memory Size: 2 GB or above recommended
· VGA card resolution: 1024 x 768 or above
· Microsoft Internet Explorer 6.0 or later
· Firefox
· Chrome
· 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
· ActiveX control plug-in for Microsoft IE
To Next Page
Loading...