Need help?Do you have a question about the LevelOne GNC-0111 and is the answer not in the manual?
General| Device Type | Network adapter |
|---|---|
| Form Factor | Plug-in card |
| Interface (Bus) Type | PCI |
| Connectivity Technology | Wired |
| Ports | 1 x RJ-45 |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
| Network Standard | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Operating System Support | Windows 2000, Windows XP |
Statement regarding FCC compliance for Class B computing devices and interference protection.
Compliance with European Emission and Immunity Standards for EMC.
Introduction to the Gigabit Ethernet PCI-e 1000SX/LX Fiber Adapter and its features.
Items to verify in the package before installing the fiber adapter.
Details about the PCI-e 1000SX/LX board models and fiber transceiver specifications.
Guide to selecting boot type like PXE or RPL via the MBA Configuration Menu.
Steps to configure network remote boot by setting MBA as the priority boot device in PC BIOS.
Instructions to disable network remote boot by changing the boot setting in PC BIOS.
Explanation of LINK/ACT and FDX LED indicators and their functions.
Details on multi-mode fiber cable, modal bandwidth, and distance for Gigabit Ethernet.
Key technical details including IEEE standards, connector, fiber optic cable, and data transfer mode.
Specifications for diagnostic LEDs, bus slot, power, temperature, humidity, and emissions.
To Next Page
