WPA/WPA2
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user
must authenticate to this router first to use the Network service. RADIUS Server
The router will detect automatically which Security type(WPA-PSK version 1 or 2) the client
uses to encrypt.
IP address or the 802.1X server‟s domain-name.
Select RADIUS Shared Key
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits
If ASCII, the length of Pre-share key is from 8 to 63.
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the
RADIUS server.
Wireless Client List
To Next Page
Loading...
