Leviton Decora Standard 5226 User Manual

Single Pole Switch with Pilot Light
Standard Style Cat. No. 5226
Decora Style Cat. No. 5626
Switch Rated: 15A-120VAC – Pilot Light Rated:
1
/4
W-125VAC
INSTALLATION INSTRUCTIONS
WARNINGS AND CAUTIONS:
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• To avoid fi re, shock or death, TURN OFF POWER at circuit breaker or fuse. Test that
power is off before wiring.
• Use these devices only with copper or copper clad wire. With aluminum wire use only
devices marked CO/ALR or CU/AL.
• NOTE: The following diagrams apply to both Standard Style and Decora Style
Combination Devices.
Standard Style Switch
Cat. No. 5226
Pilot Light
Single Pole
Tools needed to install Switch:
• Slotted, Phillips, or Robertson Screwdriver
• Wire Cutters
INSTALLING SWITCH:
NOTE: Use check boxes when Steps are completed.
WARNING:
To avoid fi re, shock, or death;
TURN OFF POWER at circuit breaker or
fuse and test that power is off before wiring!
Step 1
/./&&
/./&&
/./&&
/./&&
/./&&
/./&&
/./&&/./&&
/./&&
/./&&
/./&&
/./&&
Identify Wall Box Wiring:
To install this combination switch, the
following wires must be present inside
wall box.
Step 2
NOTE: Ground connections may differ in your
application. Ensure the device is properly
grounded to system. If the wiring in the
wall box does not resemble any of these
confi gurations, consult a qualifi ed electrician.
Prepare Wires:
Remove 5/8" (1.6 cm) of insulation from
each wire in the wall box.
Step 3
PK-93609-10-00-0A
Decora Style Switch
Cat. No. 5626
Single Pole
Pilot Light
SINGLE LINE HOT
(Common Feed)
1. Line (Hot-System)
2. Neutral
3. Ground
4. Load - Single Pole
Strip 5/8"
(1.6 cm)
Strip Gage
5/8"
(1.6 cm)
http://waterheatertimer.org/How-to-wire-Cooper-277-pilot-light-switch.html

Leviton Decora Standard 5226 Specifications

General

Brand	Leviton
Model	Decora Standard 5226
Category	Lighting Equipment
Language	English

Summary

Installation Instructions

Warnings and Cautions

Essential safety precautions to prevent shock, fire, or death during installation.

Tools Needed to Install Switch

List of necessary tools for performing the switch installation.

Identify Wall Box Wiring

Guidance on identifying the correct wires within the electrical wall box.

Prepare Wires

Instructions on stripping wire insulation to the correct length for connection.

Installing Your Switch

Detailed wiring diagram and steps for connecting the switch.

Complete Installation

Mounting the switch into the wall box and attaching the wallplate.

Test Installation

Verifying switch and pilot light functionality after power restoration.

Product Information and Warranty

Product Information

General product details and contact information for assistance.

Limited 2 Year Warranty

Details of the warranty coverage and exclusions for the product.

Document Specifications

Leviton Instruction Sheet/Manual Specifications

Technical specifications and metadata for the instruction manual document.

Fold Scheme

Diagram illustrating the folding instructions for the manual.