Operation
1. Place the salt lamp on a hard, flat surface.
2. Plug the power cord into a powered socket.
3. Tap the lighting control button to turn on the lamp.
4. Press and hold the lighting control button to adjust the lamp brightness. Release at the desired
brightness setting.
5. Press the power button once again to turn o the lamp.
NOTE: The lamp will remember the last mode and brightness level when turned on and o; however,
this memory function will not work if the power source is interrupted.
Action Command
Turn on Press once. The default level is
its brightest setting.
Dim Light Press and hold, then release at
desired level (while light is on).
Brighten
Light
Press and hold, then release at
desired level (while light is dim).
Turn o Press once.
5
To Next Page
Loading...
