Lightbulb Replacement
NOTE: It is best to complete this process seated at a table or nearby surface to place the small screws.
1. Unplug the salt lamp’s power cord.
2. Carefully remove the lamp’s salt crystals until the bulb housing is completely exposed. Place the
removed salt crystals in a safe, dry place.
3. Gently twist the bulb housing clockwise or counter-clockwise while pulling upward to remove it from
the bulb housing socket.
4. Remove the bulb from its socket, gently rotating it counter-clockwise.
6
To Next Page
Loading...
Need help?
General
