Levoit Core 300 User Manual

8
USING YOUR SMART AIR PURIFIER
1. Plug in and tap to turn on the air
purifier. The fan will start on level I.
[Figure 2.1]
2. Optionally, tap to change fan speed
between I, II, and III.
Note:
• The indicators are not buttons and cannot
be used to change the fan speed.
• The fan speed indicators will light up when
active.
• Fan speed III is the loudest, but cleans air
the quickest.
• For best results, or to address a specific
air quality issue such as smoke, run the air
purifier at high speed (level III) for 15–20
minutes before using a lower speed.
• To eectively clean air, keep windows and
doors closed while the air purifier is on.
3. Tap to turn o the air purifier.
Note: Using the VeSync app allows you to control
your air purifier remotely and access additional
functions and features.
Figure 2.1
General Operation
Sleep Mode
Sleep Mode dims all icons to half brightness
and operates quietly by using a fan speed
lower than fan speed I.
Tap
to turn Sleep Mode on.
Timer
You can manually set a timer for 2, 4, or 8
hours using the display buttons. You can
also set a timer for 1 to 24 hours through the
VeSync app.
1. Tap repeatedly to select a time. The
timer will start automatically.
Note:
• Tapping will exit Sleep Mode.
• You can still adjust the night light while the
air purifier is in Sleep Mode.
Note:
• The indicators are not buttons and cannot
be used to select a time.
• The timer indicators will light up blue when
active.
• indicator lights up when a timer is set
up through the app.
Note:
• You can change the fan speed at any time
while the timer is on.
• The timer will restart if the time is changed.
2. Once the timer has finished, the air
purifier will turn o.
3. To cancel a timer, tap until all timer
indicators are o.

Levoit Core 300 Specifications

General

Anti-odor filter	Yes
Particle filtration	0.3 µm
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	3
Efficiency	99.97 %
Noise level	50 dB
Certification	FCC, ETL, CA PROP 65
Air purify rate	- m³/h
Noise level (night mode)	24 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	2 h
Operating temperature (T-T)	-10 - 40 °C
Suitable for room area up to	20 m²
Operating relative humidity (H-H)	0 - 85 %
Clean Air Delivery Rate (CADR) (dust)	140 m³/h
Clean Air Delivery Rate (CADR) (smoke)	141 m³/h
Clean Air Delivery Rate (CADR) (pollen)	145 m³/h
Sustainability certificates	ENERGY STAR
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (max)	45 W
Power consumption (standby)	0.8 W
Control type	Touch
Display type	LCD
Product color	Black, Silver

Weight and Dimensions

Width	220 mm
Height	360 mm
Weight	3400 g