17
ABOUT ENERGYRELATED PRODUCTS
The product, in accordance with the Eco-design Requirements for Energy Related Products
Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation
(EC) NO. 1275/2008, as amended by Regulation (EU) No. 801/2013.
Required Power State Information Networked Standby
Power consumption in specified power mode, at
230V/50Hz input
≤ 2.0W
Time after which equipment is automatically
switched into mode
Immediately
Network port deactivation/activation procedures Disconnecting the Wi-Fi connection
will deactivate the Wi-Fi network.
Connecting the device to Wi-Fi will
activate the Wi-Fi network.
Networked Standby Mode: When the Wi-Fi network is activated, press and hold the on/o
button, and the device will immediately enter the networking standby state.
To Next Page
Loading...
