7
EN
USING YOUR TOWER FAN (CONT.)
Use Auto Mode for automatic fan speed
adjustments according to the room temperature.
Auto Mode
1. Tap and select Auto Mode. will
show on the display.
2. The starting fan speed is determined by
the current room temperature.
Note: You can turn o oscillation by tapping
on the tower fan or pressing on the remote.
2. The tower fan automatically starts
oscillating and operates at fan speed 12.
3. When the room temperature drops 3°C,
the fan speed will decrease to 6, then
the tower fan will automatically adjust fan
speed according to the room temperature.
Note: The max ambient working temperature
is 35°C.
Room
Temperature
Fan Speed
≤ 21°C 1
22°C 2
23°C 3
24°C 4
25°C 5
26°C 6
27°C 7
28°C 8
29°C 9
30°C 10
31°C 11
> 31°C 12
3. Optionally, tap to manually adjust the
fan speed while in Auto Mode. The tower
fan will then operate according to the
following logic:
a. If the temperature increases 1°C,
the fan speed will increase one
level.
b. If the temperature decreases 1°C,
the fan speed will decrease one
level.
Advanced Sleep Mode is an optimised sleep
mode that takes into account the stages
before you sleep, during sleep, and as you
wake up.
Advanced Sleep Mode
1. Tap to turn Advanced Sleep Mode
on. and will show on the
display.
a. After 5 seconds, the display will
turn o and selection sounds will
be disabled.
b. The starting fan speed is deter-
mined by your current fan speed
when you select Advanced Sleep
Mode.
2. After 1 hour, the fan speed will decrease
as the room temperature stabilises.
3. The tower fan then begins oscillating
and automatically adjusts the fan speed
according to the fluctuating room
temperature as you sleep and wake up.
a. If the temperature increases 1°C,
the fan speed will increase one
level.
b. If the temperature decreases 1°C,
the fan speed will decrease one
level.
To Next Page
Loading...
Need help?
General
