Lewis 150-2 - Page 33

32
Part No.
32-264
32-292
33-145
33-146
33-149
34-31
34-57
35-21
36-16
39-87
39-92
39-99
39-105
39-117
39-118
40-60
40-126
40-144
40-148
41-42
41-48
41-49
42-13
42-24
44-268
44-284
44-304
Plate
8
11
7
7
2
11
7, 9
4
3
11
8
6
3, 4, 7
6
5
3
2
5
5
3
11
3
10
10
10
7
10
PARTS LIST
Description
Cover, for end of cylinder base. Models 150-2,
150-3, 150-4
Cover, for top of arm
Skipstitch Eccentric Sleeve, on 433-147 in arm.
Models 150-2, 150-3, 150-4, 150-32, 150-33
Skipstitch Eccentric Sleeve, on 433-147 in arm.
Model 150-34
Eccentric, for feed lever to adjust length of
stitch in head
Automatic Tension Release Pin Raising Cam
Cam, for changing from 1-to-1 stitch to skip-
stitch, on top of cylinder base
Roll, for turning gear 27-165 to roll back ridge
forming disc in base of arm
Looper, in head
Stop Collar, for nipper rod
Collar, on main shaft and in swinging work
table 404-126
Spacing Collar, on shaft 14-440 in base of arm
Collar, on shaft 14-395 in base of arm
Thrust Collar, on shaft 14-400 in base of arm
Collar, on ridge forming disc shaft 14-394 in
cylinder base
Fiber Slap Washer, on ball 79-28 in head
Lock Washer, on feed screw in head
Washer, for nut 20-80 in end of ridge forming
disc shaft in cylinder base
Spacing Washer, for ball 79-9 in crank 448-131
in cylinder base
Thread Guide, under tension staff 468-23-1 on
head
Thread Guide
Thread Guide, on needle end of head
Stop, for cloth retainer on presser foot
405-529-1
Stop, for cloth retainer on presser feet
405-393-1, 405-394-6, 405-394-7, 405-395-2,
405-395-4
Ridge Forming Disc, step. Skipstitch models
150-2, 150-3, 150-4
Disc, on main shaft for driving eccentric
sleeves 33-145, 33-146
Ridge Forming Disc. Models 150-32, 150-33,
150- 34; special disc for hard finished materials
on models 150-2, 150-3, 150-4. Use with cloth
retainer 4137-136
From the library of: Superior Sewing Machine & Supply LLC