Lewmar CPX - Page 9

Lewmar CPX Vertical Winlass ref 66300104 Iss. 5 | 9
3.9-5
3.9-2
3.9-3
3.9-4
3.9-1
 WARNING!
Isolate the windlass using
circuit breaker/isolator.
For safety and performance Lewmar recommends the use of matched Lewmar anchor rodes.
1. Remove cover.
2. Pull out control arm.
3. Feed anchor rope/chain into entry hole. Tie off to suitable strong point.
4. Replace cover. Release control arm and wrap rope/chain around gypsy.
5. Power load rest of anchor rope/chain.
3.9 Loading rope/chain