Opening your safe
1. Locate the combination card that came with your safe so that you know the number
2. Rotate the dial to the left (counter clockwise) at least four complete revolutions.
This clears the dial. Stop on the zero.
3. Now rotate the dial left (counter clockwise) and pass your first combination number
three times. On the fourth rotation stop exactly on your first combination number.
4. Now rotate the dial to the right (clockwise) past your second combination number
twice and stop exactly on the second combination on the third rotation.
5. Now rotate the dial to the left (counter clockwise) and pass the third number of your
combination once and stop exactly on the third number on the second rotation.
6. Now rotate the dial to the right until it stops.
7. Turn the handle to open your safe.
Opening your safe
1. Close the door and turn the handle to the locked position.
2. Rotate the dial to the left (counter clockwise) at least four revolutions.
This clears the dial ready for the next time you need to access your safe.
We suggest that you practice opening and closing your safe multiple times before
you install it in its final position.
To Next Page
Loading...