Installing your Safe
For installation into concrete surfaces use mosonry bolts provided.
1. Install your safe in a location that is secure and sturdy.
2. Drill holes for 12mm masonry bolts in the desired location.
3. Insert the masonry bolts through the holes in the safe and into the concrete.
4. Tighten masonry bolts using a socket or spanner.
All safes should be bolted down to ensure the best possible security.
For installation nto timber surface use coach screws.
1. Install your safe in a location that is secure and sturdy.
2. Pre-drill 5mm holes in the desired location.
3. Insert the coach screws through the holes in the safe and into the timber.
4. Tighten coach screws using a socket or spanner.
All safes should be bolted down to ensure the best possibloe security.
OTHER NOTES
* If you wish to clean your safe, use a damp cloth. Do not use liquid or sprayers.
* Never try to dismantle the product by yourself.
* Safe must installed in an upright position or the warranty shall be void.
* Keep this record of your key number and combination in a secure place,
not inside the safe.
To Previous Page
Loading...